|
Community Links |
Members List |
Search Forums |
Advanced Search |
Go to Page... |
|
Thread Tools |
09-01-2014, 10:24 PM | #1 |
New Member
Join Date: Sep 2014
Location: backwoods of nowhere
Posts: 6
|
Hi, new guy here. I was thinking about doing a black repaint of the SH Monsterarts Kiryu MFS-Type 3 figure (for both display and a little play), but since I've never done a custom figure before I figured I'd ask for some advice on what I should use (mostly paint, but also if there are any tools I need besides paint brushes and tweezers). Does anyone know anyone that has worked on these figures or have done similar ones themselves? Any help would be appreciated.
|
09-03-2014, 01:22 AM | #2 |
Destroyer of Threads
Join Date: Dec 2012
Location: Somewhere over the PA border
Posts: 247
|
You might need a screwdriver or two and depending on the material you will paint maybe some differant types of black paint, like acrylic, enamel and the like. I would also suggest a some paint thinners depending on what type you choose. I know that there was a gundam thread around here somwhere, so you could check that out for more tips from the other guys.
Oh, And Good luck! |
09-05-2014, 08:27 PM | #3 |
New Member
Join Date: Sep 2014
Location: backwoods of nowhere
Posts: 6
|
Thanks. I'll look into that.
|
|
TokuNation News & Rumors |
Figuarts/Seihou GRIDMAN |
SH Figuarts BoonBoomger Red |
Hasbro Licenses Power Rangers Toys to Playmates Toys |
Discotek Media Licenses Mobile Cop Jiban |
What's going on with CSM? |
All times are GMT -5. The time now is 03:16 AM.
|