|
|||||||
 |
TokuNation
(https://www.tokunation.com/forums/index.php)
- Customs
(https://www.tokunation.com/forums/forumdisplay.php?f=37)
- - DesignIncase Power Rangers Legacy 3D Print Accessory
(https://www.tokunation.com/forums/showthread.php?t=94684)
|
https://i.imgur.com/Z3GUyXD.jpg
https://i.imgur.com/vh9xXKX.jpg https://i.imgur.com/bT3fLIF.jpg I think they go well together. Wish I took a little more time to sand those support marks down. https://i.imgur.com/RCGwby1.jpg |
|
Of course until I get the post count up....
https://i.imgur.com/MbShJXN.jpg https://i.imgur.com/ZezSRSj.jpg https://i.imgur.com/I0Eps4u.jpg https://i.imgur.com/TOcjkt8.jpg |
Close up of Saba and some other prints I finally got around to painting.
https://i.imgur.com/FcdiCjK.jpg https://i.imgur.com/98BH0se.jpg https://i.imgur.com/7CTpDF6.jpg |
Very nice!!
|
That Bow of Darkness is really cool looking. Will be interesting to see how Hasbro's' take measures up.
|
Time for LC version 2
Zeo Power Shield LC Edition https://i.imgur.com/VCbgSPS.jpg https://i.imgur.com/FFryIT6.jpg https://i.imgur.com/Mfyxsvy.jpg |
Almost done with this lot.
I thought I would just be rescaling my Legacy designs but I had to recreate almost all of them. Finished the sword and chucks last night. Sword - That was a full on redesign. I guess it's version 3 for me. Gave it a proper blade, handle, and the Star has negative space. Chucks - I had this loop on the previous design. I added in the detail on the upper part and the bottom. Can't see that clearly in this pic. When I get a chance to render or paint the model I'll post it. Really it's the boring design of the group. On the show they are basically yellow cylinders so I tried to add in some more detail. - Again hard to see in this grey resin. Shield - Showed last post. All four holes, simpler handle, and the patterns are built in or clearer. Hatchet - Mostly a rescale but I need to rebuild the handle properly. Tonfas - Mostly a rescale but I had added in more detail and I'm still not done with the handle. Also there are some dots missing. https://i.imgur.com/iu27MU8.jpg https://i.imgur.com/fO8ZgI8.jpg https://i.imgur.com/lHuQVhZ.jpg https://i.imgur.com/MT1sDuB.jpg https://i.imgur.com/8DS3FmT.jpg https://i.imgur.com/PyYJg7f.jpg |
|
|
Besides your as-always great design work, I'm really enjoying seeing who you choose for Zeo stand-ins here :p
|
https://i.imgur.com/IGYRXtS.jpg
Working on the Zeo blasters. I need to fix some thinner parts but that should be quick. Honestly I won't know if the Zeo Pod holster mode will fit in what Hasbro made until I get my hands on the figure. https://i.imgur.com/g6f1OAA.jpg https://i.imgur.com/JK44TXy.jpg https://i.imgur.com/CGVhtp6.jpg https://i.imgur.com/uFkFih0.jpg https://i.imgur.com/sKVatuA.jpg https://i.imgur.com/7n5F1Ur.jpg https://i.imgur.com/9G37ZIq.jpg https://i.imgur.com/STMUbnQ.jpg |
Adv Zeo Pistol
https://i.imgur.com/WnQiUr7.jpg https://i.imgur.com/hgMF1fC.jpg https://i.imgur.com/BgxMCQF.jpg Improved my Quasar Saber handle. I think the old design may have even caused some warping. https://i.imgur.com/NIyM99H.jpg https://i.imgur.com/z8qBV0F.jpg https://i.imgur.com/rDSTcUU.jpg https://i.imgur.com/S2ZG9Vr.jpg |
Zeo Gear coming soon
Here are some close ups of the Morphers that come with the Headless Saba set https://i.imgur.com/8myLoDT.jpg https://i.imgur.com/5MrhpqT.jpg https://i.imgur.com/6iLdH3k.jpg https://i.imgur.com/MyCFgwG.jpg https://i.imgur.com/U8hRK3u.jpg |
Zeo Collection Remake(2020 am I rite?)
Renders showing the final product https://i.imgur.com/8QKnI3h.jpg https://i.imgur.com/jhncDWQ.jpg https://i.imgur.com/xLA9s97.jpg https://i.imgur.com/y78yu3I.jpg https://i.imgur.com/6rFXdMF.jpg https://i.imgur.com/KyIv9az.jpg https://i.imgur.com/pRKr2y0.jpg https://i.imgur.com/SxUkvHB.jpg |
|
|
Got some new resin. Tenacious Siraya. Seeing how flexible and durable it is.
https://i.imgur.com/o8gaZJS.jpg https://i.imgur.com/Iz3WlbD.jpg https://i.imgur.com/kCdt8rR.jpg |
Looking good!!
|
https://i.imgur.com/EweBCxr.jpg
Made some quick tubes. Next will be to model the under bands. Applied some Tamiya gold and a varnish https://i.imgur.com/EhXoCj1.jpg https://i.imgur.com/CQSYPFE.jpg https://i.imgur.com/se3uOs2.jpg https://i.imgur.com/airW2vW.jpg |
Painting begins
https://i.imgur.com/dmCR2Tw.jpg https://i.imgur.com/hyAvbUG.jpg Painting Continues - Linework next cause these are rough. https://i.imgur.com/wOmKwYE.jpg https://i.imgur.com/U02lKBu.jpg https://i.imgur.com/GyspWhl.jpg |
|
Painted up they look really nice.
|
Ah the custom toy thread, the last bastion of sanity
Totally wrong pattern on the bands so I'll fix that later. This was mostly a size test. https://i.imgur.com/CqHzmxU.jpg https://i.imgur.com/1xWeBLG.jpg |
|
|
Growth Bombs!
https://i.imgur.com/7IPa7ky.jpg Made these a bit ago, STL file to download on Cults 3D. LC version among them. https://cults3d.com/en/3d-model/game...-growth-device |
|
https://i.imgur.com/mcQdkZz.jpg
Finally got around to making these Zeo Megazord Helmet replacements. My old zords....have been abused. Child me and flooding. The Bull head horns are totally wrong. I still got adjustments to make. I made the first prototypes in wood pla. Made some resin models and then my LCD died so I gotta wait on a new part. https://i.imgur.com/BKJNNq7.jpg https://i.imgur.com/mgwp6n1.jpg https://i.imgur.com/WNx6soA.jpg https://i.imgur.com/qthwO8r.jpg https://i.imgur.com/kktcDWl.jpg https://i.imgur.com/lftuSd9.jpg |
|
|
|
YES!! Those are amazing!!
|
|
Did a quick messy brush just to show the detail. The rest of the guy is printing right now......15 more hours.
https://i.imgur.com/Njes9S7.jpg https://i.imgur.com/y1gJHSG.jpg https://i.imgur.com/ZSNFlQS.jpg |
I am in love with your work.
|
|
|
Got the canisters made. I need to make a new lid and it got a little warpy, bubbles, and I didn't sand enough before the clearcoat.
https://i.imgur.com/bchxFSk.jpg Here was the lid before applying a clear coat. https://i.imgur.com/mAwgqAD.jpg FDM print of the barrel. https://i.imgur.com/LH4srrz.jpg |
| All times are GMT -5. The time now is 12:37 PM. |
Powered by vBulletin®
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
|
All times are GMT -5. The time now is 12:37 PM.
|