TokuNation - S.H. Figuarts (Toku Related) Thread

		TokuNation.com > TokuNation
Integration

Page 2431 of 2969

2431

Show 40 post(s) from this thread on one page

TokuNation (https://www.tokunation.com/forums/index.php)

- Toys and Collectables (https://www.tokunation.com/forums/forumdisplay.php?f=31)

- - S.H. Figuarts (Toku Related) Thread (https://www.tokunation.com/forums/showthread.php?t=94)

jalanis1234

01-07-2022 05:57 PM

Quote:

Originally Posted by MKDremare (Post 822494)

Question, is there any way to tighten a SHF joint if you use a little too much shock oil? I used a little drop on my Buster's left hip, and I think the little drop was a biiiit too much instead of being worryingly tight now, it's worryingly loose now. Admittedly, he's still sturdy enough to stay standing on his own, and his leg doesn't wiggle too bad when I shake him a little, but it'll droop down a bit when I move it forward.

Then again, he never really did a lot of movement like that, so I'm probably worrying too much over it. And using that shock oil did loosen the hip enough to let me pull off the leg and check if the ball joint had any stress marks, and to my relief, it doesn't. And wiggling it isn't something I'm going to do normally. Still worried, but probably just too paranoid, since Buster's SHF is one of the SHFs I've been looking forward to getting for a long time since the beginning of Saber.

Yeah clean off shock oil as much as you can first off. If that doesn't resolve it, take either clear nail polish or super glue and apply a very thin coat and allow 24 hours or more to dry and cure. Repeat until you get to a point you're happy with.

Henshinmorph917

01-07-2022 08:44 PM

Now that's how you play catch up with releases and like what's included, how they're being released and the teaser for Evil already.

I actually felt they could of gotten away with not painting the stamp side of the vistamps but them choosing to fully detail it reminds of the days of Gaim and Drive when those gimmick items were fully detailed

Kiwami

01-08-2022 03:44 AM

Quote:

Originally Posted by Henshinmorph917 (Post 822517)

I actually felt they could of gotten away with not painting the stamp side of the vistamps but them choosing to fully detail it reminds of the days of Gaim and Drive when those gimmick items were fully detailed

I was ready for either the display not being painted, the stamp not being painted, or both. I'm pleasantly surprised at the detail in the belt, definitely reminiscent of the pre Zi-O days.

It honestly makes me excited for figures like Evil which I didn't consider buying before, since the product just looks so good all around.

TheRaizin

01-08-2022 05:00 AM

Pre-Ex-Aid days to be exact since the Build Driver was missing some decals and so were the Gashats.

The Ohinbuster/s don't have a stamp logo on the screen however, but I guess that's fine because you have the Megalodon stamp and it'd be weird to have Rex permanently stamped on there.

I'm more so excited for Evil, though. Don't care much for Vice and Revi is simply a necessity, Evil is the suit I'm mostly looking forward to. And Demons of course.

Kiwami

01-08-2022 06:05 AM

Quote:

Originally Posted by TheRaizin (Post 822526)

Pre-Ex-Aid days to be exact since the Build Driver was missing some decals and so were the Gashats.

See, I personally wouldn't even count these since it's barely noticeable. The Ridewatches though? Ouch. Same with the Progrise Keys and Wonder Ride Books.

Quote:

Originally Posted by TheRaizin (Post 822526)

I'm more so excited for Evil, though. Don't care much for Vice and Revi is simply a necessity, Evil is the suit I'm mostly looking forward to. And Demons of course.

I'm repeating myself but Evil won me over because the figure looks so cool. I was ready to skip it, but now I want one. In fact, I was excited for Jeanne the most, now I know what I will get this season outside of Revi & Vice: Evil, Demons & Jeanne for a "Bat, Spider & Cobra"-trio display. That will look great. And 3 Web-Exclusive figures over the time it will take them to put these up for pre-order isn't too bad on the wallet.

Unless they introduce another Rider (they probably will) I think I don't need more anyway, I don't really feel like buying upgrade forms anymore.

TheRaizin

01-08-2022 06:32 AM

SHFUpgrade is holding a poll(?) to ask people which Revice Genome form people would want to turn into an upgrade kit just like last time's Flying Falcon.

https://www.facebook.com/SHFupgrade/...9446879350865/

gashatfreak

01-08-2022 06:35 AM

Personally the Progrise Keys are a bit more forgivable as most of the time they're stuck into the Driver so unless you look really hard, the lack of print isn't all that noticable.

Kiwami

01-08-2022 07:07 AM

Quote:

Originally Posted by gashatfreak (Post 822530)

Personally the Progrise Keys are a bit more forgivable as most of the time they're stuck into the Driver so unless you look really hard, the lack of print isn't all that noticable.

For anyone with a Zero-One Driver or a variation of that one yeah, but the Shot- & Slashriser have open windows and on the Force- & Cycloneriser they are as visible as Ridewatches or Wonder Ride Books. Same with the Thousandriver really.

But personally I would agree, on the Zero-One releases it doesn't bother me much.

gashatfreak

01-08-2022 07:48 AM

Quote:

Originally Posted by Kiwami (Post 822531)

I totally forgot that the Zero-One/Ark Driver were the only belts to cover most of the Progrise Keys. But yeah, not as bothersome as, say, a double spread book-like collectible thing being completely blank when its supposed to be a centrepiece feature.

MaskedRiderAsakura

01-08-2022 09:40 AM

I ended up getting the SHF upgrade stickers for the Wonder Ride books and yeah, it's a significant improvement

All times are GMT -5. The time now is 12:07 AM.

Page 2431 of 2969

2431

Show 40 post(s) from this thread on one page

Integration