|
Community Links |
Members List |
Search Forums |
Advanced Search |
Go to Page... |
![]() |
Quote:
They had a Grand Zi-O prototype, but it is a prototype and actual release might be disappointing, since Zi-O line is pretty miss in general. |
Quote:
|
https://i.4cdn.org/toy/1590906838315.jpg
Head's up y'all. Y'all might want to put your SS Den-O in hot water or sand/trim down the pegs of the armors so that they don't break when you try to remove them. JP Twitter has been going around and having problems of the form-changing process to be way too tight. Pic above has the chest armor broke, and I remember one guy having the red clear part of his belt to break one of the four pegs. |
In general, submerging your new figures in warm(not hot or boiling, WARM) water for about a minute before doing anything with them tends to be a good idea. It's helped me avoid alot of breaks that tend to happen to others. It's not foolproof, but it's a good protective measure to do.
|
...aaaaand Momotaros preorders sold out on AmiAmi within six minutes. Naturally, the page wouldn't load before then. Why do they never estimate anywhere close to actual demand for super-obvious ones like this?
|
Ah yes, the good ol' AmiAmi.
I actually got to load Momo's page twice, both times I could click the pre-order button, but my cart never loaded, the page just crashed with a generic error message. Quote:
|
I also still don't get why Bandai doesn't spread their stuff out more instead of dropping so much all at once when surely somebody who could make that decision must know what it does to the merchant sites..
I had the exact same issue as Kiwami. "Added" twice but cart never loaded. Meh, still trying for Piccolo so maybe Momo will pop back in in that time.. Edit: And almost as if right on cue... Because it honestly feels like it is at this point lol... Rider SHF orders got re-opened a half hour later on AmiAmi and I got my order in. Man I need to stop staying up for these though. |
Oh well, pre-ordered at Anime-Export and saved ¥1000, suck it AmiAmi.
Pre-orders are still open at AE, it's pay now though. |
HLJ has it listed if you go to new pre-orders too, but the actual page won't load.
And yeah, AmiAmi's lack of a discount was annoying... But they totally know they don't need it. |
|
Just got my Momotaros a little earlier on HLJ! ... using my, uh, phone? When my laptop couldn't do it? God I need to get this thing replaced.
|
We're gonna have to stay awake when MetalCluster Hopper is finally available huh?
|
It will probably be an exclusive, so probably not. Instead we'll probably just have to fork out an extra $30-40.
Also, I sat on AmiAmi for 30 minutes, but I did finally get Momotaros (and Piccolo). |
Quote:
I’m excited for this one though, there are so many awesome suits from Zero-One waiting to for their turn in the Figuarts lineup now. Metal Cluster Hopper, Burning Falcon, Rampage Gatling… Hopefully Ichi-Gata as well. I love this suit so much, I would loose my shit if they make him. Quote:
|
Quote:
|
ugh, I didn't know Momo came out today. I'm so sad that I missed out! T_T
|
Quote:
I really hope they just make Zero-Two early and we're not stuck with the "wait 3 years or something"-deal final forms get these days. Quote:
http://www.anime-export.com/product/47753 |
I think if I buy any SHFs from Zero-One; it'll be Rampage Gatling and Zero-Two. It's rare the final forms are this incredible! Burning Falcon is another amazing one, but I love the first two a lot more especially for how they're both very... streamlined? Seems an odd thing to say about Rampage when it's got a big row of robo-skeletons going down one side, but they both feel just slightly one step removed from a base form and that makes them some of my favourite final forms ever.
|
Quote:
I haven’t really talked much about Zero-Two because I stay clear of the rumors thread, but I love it. It’s not only a clever reference to the Double Riders, but also an awesome, streamlined final form. Look-wise it's perfect so I'm interested to see what it can do. My only gripe is the name Zero-One was binary, as in 0 and 1; the number 2 doesn't exist in binary. I guess that's the catch, it's supposed to be something cutting edge and never seen before, plus Zero-Two rolls of the tongue much better than One-Zero. Rampage Gatling is also awesome, mostly because they take the old "all powers combined"-shtick but applied it to the secondary Rider which I think is a great idea. I already said I'm gonna buy them all but - I really want these two! |
Quote:
Rampage Gatling I'm cool either way with giving him the all-powers-combined thing, but for me what I really like is in the visuals of Fuwa shedding Assault Wolf, going back to basics and essentially just super-upgrading Shooting Wolf. The form strikes a great balance between messy and streamlined; it had an AMAZING debut, and just to top it off I adore the new shape it gives to the Shotriser! |
Zero One is odd for me.
I think most of the suits are absolutely amazing, several of them fall into my "must have" categories...but I can't bring myself to buy them. I've almost bought Zero One and Vulcan twice, they look amazing. I dunno what it is, but I have very little interest. ...MCH and Burning Falcon will change this however, I love them so much. |
I managed to get Momotaros on HLJ about 45 minutes after he went up. Went through with no trouble, which was a first for me and SHF Riders at HLJ in almost a year.
Got Den-O in-hand about an hour ago. He's pretty dang cool. He comes with seven pairs of hands two versions of the pass in addition to the weapons and Gun From parts. For the belt, the red and purple symbols are just plug-ins. The separated weapon parts have posts on the back that slide into rail slots on the holsters. I haven't switched forms yet, because the chest feels a bit tight. I didn't want to risk anything prying it apart. There doesn't really seem to be any good point to start the separation at, and the instruction sheet only shows how to put the stuff on, not take it off. The thigh pieces are easier to take off, but not so easy that you'd have to worry about them falling off. Right now I have mine standing with a slight A-stance, so that affects things a little, but even then he is noticeably shorter than the SS Decade and W next to him. Not a lot - the top of his helmet comes to about the top of Decade's outer eye corners, but you'll still notice it. Sorry for the lack of pics - my "display" area is hideous, and I don't really have an area to do pictures properly. |
Quote:
I think the color separation is what makes me like MCH so much. |
https://pbs.twimg.com/media/EZkCbx2U...name=4096x4096
Aah~, Just a few slight modifications can make such a HUGE difference. |
SHF Upgrade revealed they're making a boxart slip for the Seihou Den-O, for those who only care about Sword Form and not Gun Form. Looks pretty on point.
https://scontent.fdet3-1.fna.fbcdn.n...36&oe=5EFD005E |
That is such a weirdly specific thing to make.
|
Yeah that's a real "Why though?" if I ever saw one. I get displaying the boxes for these, they are super pretty and when I had the space I displayed them too, but why would you do this? If anything you would need two boxes and two slipcovers, one for Sword and one for Gun Form, otherwise you're just omitting Gun Form altogether. Maybe that's the point if you only want to display main Rider boxes? Sound super niche of a concept though.
And even then - why even go through this hassle and not just display the box as is? It's beautiful enough and I personally really like "special" boxes like this. I mean it is the first Shinkocchou Seihou "two-pack" essentially. |
Quote:
|
Based on the Google Translate of their announcement post, apparently they made it because alot of users on Chinese Twitter actually were complaining about how the Den-O box didn't match the others. While I personally agree with you guys in not seeing it as a big deal, hey, if they can make money off it, why not?
|
Supply and Demand truly do be strange sometimes.
|
I know it's been talked about before, but when do you think guys they'll reveal a SHF Tsukuyomi if ever? I feel some time in december or something.
|
Quote:
The best guess anyone can make is said big event in October, mostly because that's their largest platform were they announce the most new stuff. |
Anybody ever bought a bootleg SHF?
|
Not for Toku figures specifically, but yes. Their quality tends to depend on who's making them.
|
Quote:
I have. I bought the Homecoming Spider-Man and the Cross-Z Magma SHF. The Spider-Man one was pretty cool and almost looks like the real thing but he is a bit loose. The Cross-Z magma.... AVOID IT AT ALL COSTS! The plastic is some weird bendy mess that's way more bendy than hasbro's plastic, it's brittle, and weirdly uses 1.0 SHF technology on the torso and legs. The legs are a loose floppy mess and the wrist arms practically disintegrate after switching one hand. For 20$ it is literally garbage. Avoid toku bootlegs at all cost. Recently a SS Agito and Rider Kicks Build bootlegs have surfaced and they look atrocious. The only SHF KOs I know that turn out fine or exceptional are Iron-Man ones, specifically the mark 85 and 50 KOs. https://i.ytimg.com/vi/Bg3GuAtolh8/maxresdefault.jpg |
3rd Party Dragon Ball figures have been seeing a rise over the past year or so. Companies like Demoniacal Fit and Class E Adventurer have actually had some pretty solid releases. Makes me wonder if one day they'll get to the level of 3rd Party Transformers toys.
|
Quote:
Though from what I've seen Mk 46, 47 and 50s are the most produced KOs. |
I really hope a SHF Tsukuyomi happens.
|
Quote:
the 46 and 47 are not great, in my opinion. The paint was very dull compared to official figures, the joints on one of them were..i don't remember, weird? like they only had part of the movement I expected. the shoulder pad on one popped off a lot (but I think that also happens on one of my official Iron Mans, don't remember which). Unless there's a different KO version of 46/47, I'd say avoid them. |
Quote:
|
All times are GMT -5. The time now is 11:41 AM. |
Powered by vBulletin®
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All times are GMT -5. The time now is 11:41 AM.
|