TFW2005HisstankThundercatsTokuNationToyark
Go Back   TokuNation.com > TokuNation
Reload this Page

Integration

Rules Register Community Today's Posts Search
TokuNation
Page 9 of 20 « First 78 9 101119 Last »
Show 40 post(s) from this thread on one page

TokuNation (https://www.tokunation.com/forums/index.php)
-   Customs (https://www.tokunation.com/forums/forumdisplay.php?f=37)
-   -   Tokunation's Summer Gunpla Group Build: High Grade Edition! (https://www.tokunation.com/forums/showthread.php?t=53035)

uchihabro77 06-22-2013 10:45 PM
Quote:
Originally Posted by ryan (Post 177710)
Nice!
thanks :D

blastmonkey 06-22-2013 10:53 PM
I think I have it figured out. The majority of the build will be the Guntank. The turret hands will be replaced with the clamp arms from the ball twin set. The two cannons will be replaced with a crane gantry on one side and the other side covered up. I'll have to replace the thrusters on the back, maybe scratchbuild around them. I think that should cover it.

xSkullheartx 06-22-2013 11:32 PM
Quote:
Originally Posted by blastmonkey (Post 177717)
I think I have it figured out. The majority of the build will be the Guntank. The turret hands will be replaced with the clamp arms from the ball twin set. The two cannons will be replaced with a crane gantry on one side and the other side covered up. I'll have to replace the thrusters on the back, maybe scratchbuild around them. I think that should cover it.
Sounds awesome!

SideswipePrime 06-23-2013 08:43 PM
1 Attachment(s)
I made a quick mock up of the Gundam. What do you guys think?

http://www.tokunation.com/attachment...1&d=1372038145

Although...considering the Quanta's leg desing...I might have to go with the Sparrow front waist piece.

I'm also not sure that the proportions will look like that, as I fear the Quanta's head may be too small on the HG.

blastmonkey 06-23-2013 09:02 PM
I tried fitting the G-bouncer's arms onto the Strike Freedom's Torso, it seems as if the peg is too short. It fits, but for the sake of stability, you might need to lengthen that post. Another thing I noticed was the gap in the rear of Strike Freedom's waist from the movable waist armor gimmick they incorporated.

On a side note, the G-Bouncer is one smexy looking MS design. Makes me wish there were a third generation of Wolf's personal MS. Stupid need for character growth of the protagonist.

Kiryu 06-23-2013 09:06 PM
Quote:
Originally Posted by blastmonkey (Post 178253)
I tried fitting the G-bouncer's arms onto the Strike Freedom's Torso, it seems as if the peg is too short. It fits, but for the sake of stability, you might need to lengthen that post. Another thing I noticed was the gap in the rear of Strike Freedom's waist from the movable waist armor gimmick they incorporated.

On a side note, the G-Bouncer is one smexy looking MS design. Makes me wish there were a third generation of Wolf's personal MS. Stupid need for character growth of the protagonist.
It should be fine if he thickens the peg with super glue and paint.

SideswipePrime 06-23-2013 09:09 PM
Quote:
Originally Posted by blastmonkey (Post 178253)
I tried fitting the G-bouncer's arms onto the Strike Freedom's Torso, it seems as if the peg is too short. It fits, but for the sake of stability, you might need to lengthen that post. Another thing I noticed was the gap in the rear of Strike Freedom's waist from the movable waist armor gimmick they incorporated.

On a side note, the G-Bouncer is one smexy looking MS design. Makes me wish there were a third generation of Wolf's personal MS.
So...I would need putty or something to fill in the gap?

Well...could I just use an alternative torso, and glue the DRAGOONs on? I don't know what my options would be...perhaps I could customize the AGE-2's torso (take out the A) but there is the spoiler to worry about...

P.S. I also really appreciate you ripping apart your Gunpla to help me.

Quote:
Stupid need for character growth of the protagonist.
Well that, and the cool one always dies.

EDIT: I have Styrene Rods Kiryu, perhaps those could work for lengthening them.

xSkullheartx 06-23-2013 09:16 PM
Quote:
Originally Posted by SideswipePrime (Post 178229)
I made a quick mock up of the Gundam. What do you guys think?

http://www.tokunation.com/attachment...1&d=1372038145

Although...considering the Quanta's leg desing...I might have to go with the Sparrow front waist piece.

I'm also not sure that the proportions will look like that, as I fear the Quanta's head may be too small on the HG.
I like the design,I think it'll be an awesome build,but......

http://www.youtube.com/watch?v=zEAN9eDvIPc

Just sayin.:P

SideswipePrime 06-23-2013 09:19 PM
Quote:
Originally Posted by xSkullheartx (Post 178276)
I like the design,I think it'll be an awesome build,but......

http://www.youtube.com/watch?v=zEAN9eDvIPc

Just sayin.:P
Are you saying I'm unoriginal? I just like the DRAGOONs man...

xSkullheartx 06-23-2013 09:21 PM
Quote:
Originally Posted by SideswipePrime (Post 178281)
Are you saying I'm unoriginal? I just like the DRAGOONs man...
No,I'm not saying that.I'm just showing you what it would look like.I saw your design and it looks close to Prime92's.


All times are GMT -5. The time now is 10:44 AM.
Page 9 of 20 « First 78 9 101119 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin®
Copyright ©2000 - 2025, vBulletin Solutions, Inc.

 

All times are GMT -5. The time now is 10:44 AM.

Powered by vBulletin®
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Powered by vBadvanced CMPS