[Ehmar]

Here's a quick fix to customize your Dx Blizzard Force Megazord into the much sought after Dx Bakurenoh (without paying a shed-load for it.)

The Dx Bakurenoh(Jap exclusive) is extremely expensive... so I bought a Dx Blizzard Force Megazord from eBay... and I hated the paint job Bandai of America gave it, especially the horrid yellow teeth... so I painted it as close to screen-accuracy as I could.

All you do is take apart as many pieces as you can to ensure not to affect the Blue on the CarnoRyutus/ArcticTyranno & the white on ChasmoShieldon/ArticTricera.
Obviously the dino's themselves separate in various places but best to unscrew the knee pads, bottom of the feet, The head-frills of the CarnoRyutus and unscrew the robot head.

I used Gloss, Silk and Clear "Tamiya" and "Remmel" model paints. (which are fairy inexpensive.) If you can't get an exact match of colour, Try mixing up different shades of colors by adding white/black in.

The painting took 2-3 hours max.

Granted the finish is quite sloppy, but I intend to go back and finish the paint-job properly.

I painted the following:
(Lilac - white tamiya mixed with purple tamiya paint)
CarnoRyutus/ArcticTyranno Teeth
CarnoRyutus/ArcticTyranno Feet-Claws
CarnoRyutus/ArcticTyranno Hand-Claws
CarnoRyutus/ArcticTyranno Belt 'Triangles'
CarnoRyutus/ArcticTyranno Gem on Robot Forehead
ChasmoShieldon/ArticTricera forehead plates
ChasmoShieldon/ArticTricera Horns on head
ChasmoShieldon/ArticTricera Feet

(Aqua - Remmel Stone Green mixed with White Tamiya)
CarnoRyutus/ArcticTyranno
ChasmoShieldon/ArticTricera Bolts under head

(Black tamiya paint)
ChasmoShieldon/ArticTricera mouth bottom half

(White tamiya paint)
ChasmoShieldon/ArticTricera Handle piece of tail

(Silver tamiya paint)
CarnoRyutus/ArcticTyranno neck Design behind frill
ChasmoShieldon/ArticTricera Knee Pads

(Silver tamiya paint, followed by a clear red tamiya paint)
CarnoRyutus/ArcticTyranno robot eyes

(Silver tamiya paint, followed by a clear orange tamiya paint)
CarnoRyutus/ArcticTyranno eyes

(Silver tamiya paint, followed by a purple mix of clear red tamiya mixed with clear blue tamiya)
CarnoRyutus/ArcticTyranno Tail Plates
CarnoRyutus/ArcticTyranno Leg Plates
ChasmoShieldon/ArticTricera Back Leg Plates

And there you have it... a fairly screen accurate version of Bakurenoh.
Good Luck.
(I did this back in April 2014.)