Next Kamen Rider trademark listed: "Kamen Rider Geats"

JusticeMagnum · 05-28-2023, 11:24 AM

Looks like the sketch for the Boost MK 9 buckle was correct, not let's see if it'll be the same for Buffa Maou & Tycoon Shogun.

Excellionus99 · 05-28-2023, 03:18 PM

I personally think its safe to say they are likely accurate, but of course I could be wrong!

Sunred · 05-28-2023, 08:14 PM

Quote:

Originally Posted by JusticeMagnum

Looks like the sketch for the Boost MK 9 buckle was correct, not let's see if it'll be the same for Buffa Maou & Tycoon Shogun.

Quote:

Originally Posted by Excellionus99

I personally think its safe to say they are likely accurate, but of course I could be wrong!

I think it's safe to say even if it's not accurate we will get something close. And if they don't make it to the show we can hope for those two to appear in the v-cinemas.

Sevenlima · 05-28-2023, 09:03 PM

There's too many additional KRs in GEATS.

JusticeMagnum · 05-31-2023, 12:56 AM

So a new sketch has come out for how Tycoon's Shogun buckle works. Looks like it has a similar gimmick to how the Boost MK IX buckle works (minus the revolve aspect).

MKDremare · 05-31-2023, 03:05 AM

Quote:

Originally Posted by JusticeMagnum

So a new sketch has come out for how Tycoon's Shogun buckle works. Looks like it has a similar gimmick to how the Boost MK IX buckle works (minus the revolve aspect).

Actually I think it still does use the Revolve On gimmick. Like the sword part stays on the Desire Driver, the sheath buckle gets pulled off, Revolve On is activated, and then the sheath buckle gets insert into the other side.

Enppu · 05-31-2023, 12:56 PM

Quote:

Originally Posted by MKDremare

Actually I think it still does use the Revolve On gimmick. Like the sword part stays on the Desire Driver, the sheath buckle gets pulled off, Revolve On is activated, and then the sheath buckle gets insert into the other side.

According to Google Translate, that seems to be what the kanji is saying. Interested to see how it will look physically, since the handle part has to go on top of the sheath, but the blade has to go under it.

MKDremare · 05-31-2023, 01:12 PM

Quote:

Originally Posted by Enppu

According to Google Translate, that seems to be what the kanji is saying. Interested to see how it will look physically, since the handle part has to go on top of the sheath, but the blade has to go under it.

I imagine that the sheath part itself is actually more of a divot than an actual sheath to allow the handle of the sword to be over it if this is accurate. Or that the sheath buckle is just thinner.

LevisNox · 05-31-2023, 04:07 PM

So that means Tycoon will have two final forms?

open blade more an attack base form with the blade sheath being a defense form?

OneEyedOwl · 05-31-2023, 04:34 PM

Quote:

Originally Posted by LevisNox

So that means Tycoon will have two final forms?

open blade more an attack base form with the blade sheath being a defense form?

more like geats where one is incomplete i think

05-28-2023, 11:24 AM	#1711
JusticeMagnum JusticeMagnum Join Date: Apr 2015 Location: CA Posts: 322	Looks like the sketch for the Boost MK 9 buckle was correct, not let's see if it'll be the same for Buffa Maou & Tycoon Shogun. Attached Thumbnails

05-28-2023, 08:14 PM	#1713
Sunred Ex-Weather Three leader Join Date: Jan 2012 Posts: 10,158	Quote: Originally Posted by JusticeMagnum Looks like the sketch for the Boost MK 9 buckle was correct, not let's see if it'll be the same for Buffa Maou & Tycoon Shogun. Quote: Originally Posted by Excellionus99 I personally think its safe to say they are likely accurate, but of course I could be wrong! I think it's safe to say even if it's not accurate we will get something close. And if they don't make it to the show we can hope for those two to appear in the v-cinemas. __________________

05-28-2023, 09:03 PM	#1714
Sevenlima Veteran Member Join Date: Feb 2014 Posts: 2,463	There's too many additional KRs in GEATS. __________________ "One generation should be a example to the next one" Last edited by Sevenlima; 05-29-2023 at 08:26 AM..

05-31-2023, 12:56 AM	#1715
JusticeMagnum JusticeMagnum Join Date: Apr 2015 Location: CA Posts: 322	So a new sketch has come out for how Tycoon's Shogun buckle works. Looks like it has a similar gimmick to how the Boost MK IX buckle works (minus the revolve aspect). Attached Thumbnails

05-31-2023, 12:56 PM	#1717
Enppu New Member Join Date: Aug 2021 Location: Finland Posts: 67	Quote: Originally Posted by MKDremare Actually I think it still does use the Revolve On gimmick. Like the sword part stays on the Desire Driver, the sheath buckle gets pulled off, Revolve On is activated, and then the sheath buckle gets insert into the other side. According to Google Translate, that seems to be what the kanji is saying. Interested to see how it will look physically, since the handle part has to go on top of the sheath, but the blade has to go under it. Last edited by Enppu; 05-31-2023 at 12:59 PM..