S.I.C Orange Arms help

Megasone · 03-27-2018, 08:29 PM

Hey guys i recently bought a S.I.C Orange Arms and i was trying to put it into the display etand thing that comes with it, and the ornament on the helmet broke off. None of the peg is on the ornament its entirely in the helmet. Im guessing I'd use glue for this, although I'm not sure what kind. Any advice?

Talisman · 03-27-2018, 08:36 PM

Either of these. I'd start with the Extra Thin and switch to the thicker stuff if it doesn't hold. Easier and more precise to apply than most other stuff you can get.

https://www.amazon.com/Tamiya-87038-.../dp/B000BMYWYC

https://www.amazon.com/Tamiya-TAM870.../dp/B002CDPZDK

Megasone · 03-27-2018, 08:52 PM

Thanks alot, I'll post an update when it comes in.

03-27-2018, 08:36 PM	#2
Talisman Devil from the Depths Join Date: Dec 2013 Location: Airspace B7R Posts: 8,035	Either of these. I'd start with the Extra Thin and switch to the thicker stuff if it doesn't hold. Easier and more precise to apply than most other stuff you can get. https://www.amazon.com/Tamiya-87038-.../dp/B000BMYWYC https://www.amazon.com/Tamiya-TAM870.../dp/B002CDPZDK __________________ Fly with me on Bluesky! Talisman on MyFigureCollection